Home › Toyota Camry Oil Capacity
By Auto Review Nest Editorial Team · Last updated: July 31, 2026 · 2024 gas and hybrid capacities and 2010–2011 hybrid coverage rechecked.
Across common 2002–2026 U.S.-market models, Toyota Camry oil capacity ranges from about 4.0 to 6.4 U.S. quarts with a new filter. The 2025–2026 hybrid and the 2024 gas 2.5L each use 4.5 quarts. The 2018–2023 gas 2.5L and 2018–2024 hybrid use 4.8 quarts, while the 2018–2024 V6 uses 5.7 quarts. Match the amount to your model year and engine, then use the dipstick for the final level.
Quick Answer
A Toyota Camry can take 4.0–6.4 quarts of engine oil with a new filter, depending on the year and engine. The 2025–2026 hybrid uses 4.5 qt of SAE 0W-8. The 2024 gas 2.5L uses 4.5 qt of SAE 0W-16, while the 2018–2023 gas 2.5L and 2018–2024 hybrid use 4.8 qt of SAE 0W-16. The 2018–2024 3.5L V6 uses 5.7 qt of SAE 0W-20.
Key Takeaways
- Separate the 2024 gas and hybrid applications. The 2024 gas 2.5L takes 4.5 quarts with a filter, while the 2024 hybrid takes 4.8 quarts.
- Identify the engine before buying oil. Gas four-cylinder, hybrid, and V6 Camrys can use different capacities and viscosity grades in the same model-year range.
- The chart uses filter-change refill amounts. A routine oil change normally includes a new filter, which holds part of the total oil volume.
- New 2025–2026 Camry hybrids use SAE 0W-8. Follow the exact manual before using SAE 0W-16 as a temporary substitute.
- The listed capacity is a starting reference. Add slightly less first, run the engine, wait several minutes, and finish the refill with the dipstick.
At a Glance
| Time Required | 30–60 minutes for a careful DIY oil change |
| Difficulty | Beginner to moderate |
| Tools Needed | Drain pan, funnel, socket and ratchet, torque wrench, oil filter wrench if needed, new filter, new drain plug gasket, gloves, and safe vehicle support |
| Main Verification | Exact engine, required oil grade, filter-change capacity, and final dipstick level |
How Do You Identify Your Toyota Camry Engine?
Do not choose oil from the model year or trim badge alone. First confirm whether your Camry has a gas four-cylinder, hybrid four-cylinder, or V6. Some model years offered more than one powertrain, and those engines may use different refill amounts.
Check the engine and oil requirements in your owner’s manual, on the underhood emissions label, through a VIN-based Toyota parts or manual lookup, or with a Toyota dealer parts counter. The 2025–2026 U.S. Camry lineup is hybrid-only, but 2018–2024 models may have a 2.5L gas engine, 2.5L hybrid engine, or 3.5L V6.
The 2024 model year needs special attention. Its gas 2.5L A25A-FKS and hybrid 2.5L A25A-FXS use the same SAE 0W-16 viscosity, but Toyota lists different filter-change refill amounts.
Identification rule: Match the model year, engine code, and powertrain before using a capacity figure. Similar engine sizes do not always have the same oil pan, filter, or refill amount.
Toyota Camry Oil Capacity: Engine & Model-Year Quick Reference
Use this chart as a starting point for common U.S.-market Camry models. Every number is a drain-and-refill amount with the oil filter replaced. Without-filter figures are intentionally omitted because most routine oil changes include a new filter and the smaller no-filter amount varies by application.
How this chart was built: The capacities and grades were cross-checked against model-year Toyota owner and maintenance materials plus year-and-engine-specific references. Gas and hybrid applications are separated where Toyota lists different amounts. Liter figures were normalized to U.S. quarts, and the final level must still be confirmed with the dipstick.
Important 2024 exception: The gas 2.5L A25A-FKS takes 4.5 qt with a new filter, while the hybrid 2.5L A25A-FXS takes 4.8 qt. Do not use one 2024 capacity for both powertrains.
| Model Years | Engine | Oil Capacity With Filter | Recommended Oil |
|---|---|---|---|
| 2025–2026 | 2.5L hybrid A25A-FXS | 4.5 qt / 4.3 L | SAE 0W-8, JASO GLV-1 |
| 2024 | 2.5L gas four-cylinder A25A-FKS | 4.5 qt / 4.3 L | SAE 0W-16 |
| 2018–2023 | 2.5L gas four-cylinder A25A-FKS | 4.8 qt / 4.5 L | SAE 0W-16 |
| 2018–2024 | 2.5L hybrid A25A-FXS | 4.8 qt / 4.5 L | SAE 0W-16 |
| 2018–2024 | 3.5L V6 2GR-FKS | 5.7 qt / 5.4 L | SAE 0W-20 |
| 2012–2017 | 2.5L four-cylinder 2AR-FE / 2AR-FXE | 4.6 qt / 4.4 L | SAE 0W-20 |
| 2012–2017 | 3.5L V6 2GR-FE | 6.4 qt / 6.1 L | SAE 0W-20 or grade listed in your manual |
| 2010–2011 | 2.5L gas four-cylinder 2AR-FE | 4.7 qt / 4.4 L | Check the owner’s manual; many U.S. applications use SAE 0W-20 |
| 2010–2011 | 2.4L hybrid 2AZ-FXE | 4.5 qt / 4.3 L | SAE 0W-20 or the grade listed in the exact owner’s manual |
| 2007–2011 | 3.5L V6 2GR-FE | 6.4 qt / 6.1 L | SAE 5W-30 in many U.S. manuals; verify the exact year |
| 2007–2009 | 2.4L four-cylinder 2AZ-FE / hybrid 2AZ-FXE | 4.5 qt / 4.3 L | SAE 0W-20 or 5W-20 on many U.S. applications; verify the exact year |
| 2002–2006 | 2.4L four-cylinder 2AZ-FE | 4.0 qt / 3.8 L | SAE 5W-30 in many U.S. manuals |
| 2002–2006 | 3.0L / 3.3L V6 | 5.0 qt / 4.7 L | SAE 5W-30 in many U.S. manuals |
Unit check: Toyota may list liters first in some manuals. A 4.5-liter refill equals about 4.8 U.S. quarts, while 4.4 liters equals about 4.7 quarts. Do not treat liters and quarts as interchangeable.
How Much Oil Should You Buy for a Camry Oil Change?
Have enough oil available to reach the listed capacity, but do not plan to empty every container into the engine. Begin about 0.2–0.3 quart below the reference amount, run the engine briefly, wait for drain-back, and top off in small steps.
| Listed Filter-Change Capacity | Oil to Have Available | Refill Approach |
|---|---|---|
| 4.0–4.8 qt | 5 qt | Do not automatically empty the full five-quart container |
| 5.0–5.7 qt | 6 qt | Start below capacity and reserve the remainder for topping off |
| 6.4 qt | 7 qt | Add gradually and stop when the dipstick reaches the correct range |
What Oil Grade Does Each Toyota Camry Engine Use?
Use the viscosity printed in your owner’s manual and on the oil-filler cap. Modern Camry engines use low-viscosity oil to support cold-start flow, friction control, and fuel economy. A newer performance standard does not give you permission to change the required viscosity.
What Oil Does a 2025–2026 Camry Hybrid Use?
The 2025–2026 Camry hybrid uses SAE 0W-8 oil meeting JASO GLV-1. Toyota identifies 0W-8 as the preferred grade for fuel economy and cold-weather starting. Follow the substitution wording in the manual for your exact year before using 0W-16 temporarily, and return to 0W-8 at the next change when instructed.
What Oil Does a 2018–2024 2.5L Camry Use?
The 2018–2024 gas and hybrid 2.5L engines use SAE 0W-16 in common U.S. applications, but their capacities are not identical across every year. The 2018–2023 gas engine and 2018–2024 hybrid use 4.8 quarts with a new filter, while the 2024 gas engine uses 4.5 quarts.
Many Toyota manuals in this generation permit SAE 0W-20 only as a temporary substitute when 0W-16 is unavailable and direct the owner to restore 0W-16 at the next oil change. Check the wording for your exact model year.
What Oil Does a 3.5L V6 Camry Use?
The 3.5L V6 changed capacity between generations. The 2012–2017 2GR-FE generally takes 6.4 qt with a new filter, while the 2018–2024 2GR-FKS takes 5.7 qt. Late-model V6 Camrys commonly specify SAE 0W-20, while earlier 2007–2011 versions commonly list SAE 5W-30. Verify the exact year before buying oil.
What Oil Do Older 2002–2011 Camrys Use?
Many older Camrys specify SAE 5W-30, while some later four-cylinder applications use or allow SAE 0W-20 or 5W-20. The 2010–2011 gas 2.5L uses a different capacity from the 2010–2011 hybrid 2.4L, so do not use one figure for both engines. A 2006 2.4L, 2009 2.4L, 2010 gas 2.5L, 2010 hybrid 2.4L, and 2011 V6 can also have different requirements. Use the manual for the exact year and engine instead of applying one grade to the whole generation.
Does a Toyota Camry Need Synthetic Oil?
Toyota Genuine Motor Oil is one valid choice, but an equivalent oil can also be suitable when it has the required viscosity and performance certification. The oil label and the owner’s manual determine compatibility. Brand name alone does not.
Low-viscosity grades such as 0W-8, 0W-16, and 0W-20 are commonly sold as synthetic or synthetic-blend products. However, do not select oil only because the container says “full synthetic.” It must still match the SAE grade and applicable certification required for your Camry. See the Toyota Camry synthetic oil guide for a fuller comparison of oil formulations and service intervals.
Warning: Do not jump to a heavier viscosity because an engine has high mileage. If you choose a high-mileage formula, keep the viscosity and performance specification required by the manual unless qualified service guidance supports a change.
Why Does Toyota Camry Oil Capacity Change by Generation?
Camry oil capacity changes when Toyota changes the engine, oil pan, filter arrangement, lubrication system, or powertrain design. The 2024 model year shows why engine identification matters: the gas 2.5L uses 4.5 quarts with a filter, while the hybrid 2.5L uses 4.8 quarts.
A difference such as 4.5 versus 4.8 quarts may appear small, but the final oil level affects lubrication, crankcase ventilation, and temperature control. Underfilling can reduce the oil available to bearings, timing components, and other lubricated surfaces. Significant overfilling can aerate the oil or raise crankcase pressure.
Record the date, mileage, viscosity, filter, and amount used so you have a clear maintenance history.
Refill rule: Treat the listed capacity as a starting reference. The dipstick determines the final level after the engine has run and the oil has had time to drain back.
Which Oil Certifications and Brands Are Acceptable?
Use oil that matches the SAE viscosity and the performance standard required by the manual. The manual may name the API, ILSAC, or JASO category current when it was printed.
API began licensing API SQ, ILSAC GF-7A, and ILSAC GF-7B on March 31, 2025. GF-7B applies only to SAE 0W-16. API SQ also covers ultra-low-viscosity grades such as SAE 0W-8 and SAE 0W-12.
Older Camry manuals commonly cite API SP, ILSAC GF-6, or earlier categories. The 2025–2026 Camry hybrid requires SAE 0W-8 meeting JASO GLV-1. Prioritize the exact Camry viscosity and compatibility requirement instead of assuming every newer certification applies to every engine or viscosity.
- Use: the exact viscosity required for your engine and model year.
- Use: an oil carrying the applicable certification mark or specification.
- Use: a quality oil filter matched to the engine and model year.
- Use: a new drain plug gasket or crush washer when specified.
- Avoid: oil with vague labeling or no recognized performance certification.
- Avoid: mixing viscosities to create an improvised grade.
- Avoid: choosing oil solely from the brand name or “synthetic” wording.
- Avoid: pouring in the entire container without checking the dipstick.
[Products Worth Considering]
ECOGARD X5608 is a premium cartridge oil filter designed for a wide range of Toyota, Lexus, and Scion vehicles. It helps protect your engine by screening out harmful contaminants and is built for use with both synthetic and conventional oils. Included O-rings support a proper housing seal for dependable maintenance between oil changes.
FOCUSFILTER 04152-YZZA1 OEM grade oil filter is designed to help protect your engine with reliable filtration and 10K mile protection. It cross references multiple OE part numbers and fits a wide range of Toyota and Lexus applications, making it a practical replacement for routine maintenance. Built for compatible vehicles including Camry, Avalon, Highlander, Tacoma, RAV4, Sienna, ES 350, and RX 350.
This 12-pack oil filter and drain plug washer set is designed for a wide range of Toyota and Scion vehicles, helping support clean oil flow and dependable engine performance. It replaces several common OE part numbers and offers an easy-fit solution for routine maintenance. Built with corrosion-resistant materials and efficient filtration, it helps keep engine contaminants out and supports longer service life.
When Should You Use High-Mileage or Hybrid-Specific Oil?
No universal mileage makes high-mileage oil mandatory. You may consider a high-mileage formula when an older Camry develops minor seal seepage or measurable oil consumption, but the product should retain the viscosity and certification required for the engine. A 2016 Camry calling for 0W-20 should not automatically move to 5W-30.
Hybrid Camrys start and stop the gasoline engine frequently, making quick oil flow important. The 2025–2026 Camry hybrid takes 4.5 qt of SAE 0W-8 with a filter change. The 2018–2024 Camry hybrid takes 4.8 qt of SAE 0W-16 with a filter change, while the 2010–2011 hybrid uses a different 2.4L engine and a 4.5-quart filter-change reference.
Pro Tip: If the level drops between changes, check it under the same conditions at regular intervals and record how much oil you add. Consistent measurements are more useful than one isolated low reading.
[Products Worth Considering]
This upgraded aluminum oil filter housing cap is designed as a direct replacement for compatible Toyota and Lexus models, helping restore a secure, reliable seal for the oil filter housing. Built from durable aluminum, it offers improved strength and heat resistance over factory plastic covers, while the included gasket and plug support straightforward installation and dependable leak-free performance.
Designed specifically for Toyota Camry 2025-2026 models, this windshield sunshade provides full front coverage to help block sunlight and reduce heat buildup inside the cabin. Its reflective multi-layer construction helps protect the dashboard, seats, and steering wheel from UV exposure while keeping the car cooler and more comfortable. With quick foldable installation and durable stitched edges, it is made for everyday use and easy storage.
GENUINE OEM: Original Toyota/Lexus factory oil filter part number 90915-YZZN1, ensuring perfect fit and optimal performance for your vehicle
Oil-Change Refill Checklist: Drain, Fill, Torque, and Verify
This checklist focuses on preventing capacity and refill errors. For removal details, underbody access, and a longer procedure, use the full Toyota Camry oil-change guide. Work on level ground, protect yourself from hot components, and never rely on a jack alone.
- Confirm the engine and oil specification. Check the owner’s manual, oil cap, emissions label, VIN-based lookup, or Toyota parts counter.
- Warm the engine briefly. Warm oil drains more readily, but let dangerously hot exhaust components cool before working.
- Support the vehicle safely. Use suitable ramps or jack stands on a flat, stable surface.
- Drain the oil and replace the filter. Confirm that the old filter gasket came off with the filter.
- Install the correct drain plug gasket. Tighten the plug to the specification for your exact year, engine, and oil-pan configuration. Do not apply a generic Camry torque value.
- Add slightly less than the reference capacity. For a 4.8-quart reference, begin around 4.5–4.6 quarts. For a 4.5-quart reference, begin around 4.2–4.3 quarts.
- Run the engine briefly. Shut it off and inspect the drain plug and filter for leakage.
- Wait several minutes and check the dipstick. Add small amounts until the level reaches the acceptable range without exceeding the full mark.
- Reset the maintenance reminder if required. Follow the procedure in the owner’s manual for the exact model year.
- Record the service. Note the date, mileage, viscosity, certification, filter, and final amount used.
Stop immediately: If the oil-pressure warning remains on, the dipstick shows no oil, a large leak appears, or the engine makes abnormal noise after the change, shut the engine off and inspect the work before driving.
[Products Worth Considering]
Genuine Toyota - Oil Drain Plug Gaskets (QTY10)
【Fitment】: Fit for Toyota 4Runner, Avalon, C-HR, Camry, Celica, Corolla, Echo, FJ Cruiser, Highlander, Land Cruiser,Matrix, MR2,Paseo, PickUp, Prius ,RAV4,Sequoia, Venza, Tundra,Tacoma; And Lexus CT, ES, GS, HS, IS, LC, LS, LX, NX, RC, RX, SC, UX models; And Scion iM,IQ,TC,XA,XB,XD models.
REPLACEMENT-Includes 24 Pcs Aluminum Oil Drain Plug Gaskets,regular replacement of the oil drain plug gasket can better protect your engine
How Often Should You Change Toyota Camry Oil?
For the 2025 U.S. Camry, Toyota schedules maintenance checkpoints every 5,000 miles or six months. Under normal use, engine oil and filter replacement is due by 10,000 miles or 12 months after the previous oil change, whichever comes first.
The 2025 guide shortens the oil-and-filter interval to 5,000 miles or six months when the vehicle is mainly driven on dirt or dusty roads or repeatedly makes trips under five miles in temperatures below 32°F/0°C. Other model years list different special-use conditions, so use the guide for your exact Camry.
For a broader year-by-year explanation, review the Toyota Camry maintenance schedule.
How Do You Check Camry Oil After Refilling?
Park on level ground, warm the engine, shut it off, and wait at least five minutes so the oil can drain into the pan. Pull the dipstick, wipe it clean, insert it fully, then remove it again to read the level.
The oil should sit within the marked range without exceeding the full mark. If it is low, add a small amount and repeat the check. See how to add engine oil to a Toyota Camry for a focused top-off procedure.
If the oil is above full, remove the excess before driving. Recheck the filter and drain plug for leaks after the first short trip.
Frequently Asked Questions
How many quarts of oil does a 2.5L Toyota Camry take?
The amount depends on the year and powertrain. The 2018–2023 gas 2.5L and 2018–2024 hybrid take 4.8 quarts with a new filter. The 2024 gas 2.5L and 2025–2026 hybrid use 4.5 quarts. The 2012–2017 2.5L takes about 4.6 quarts, while the 2010–2011 gas 2.5L takes about 4.7 quarts. Verify the exact engine and final dipstick level.
How much oil does a 2024 Toyota Camry take?
A 2024 Toyota Camry with the gas 2.5L A25A-FKS uses 4.5 quarts with a new filter. The 2024 Camry Hybrid uses 4.8 quarts, and the 3.5L V6 uses 5.7 quarts. The 2.5L engines use SAE 0W-16, while the V6 uses SAE 0W-20.
How many quarts does a 2.4L Toyota Camry take?
Many 2002–2006 2.4L Camrys take about 4.0 quarts with the filter. Many 2007–2011 2.4L gas and hybrid applications take about 4.5 quarts with the filter. Check the manual because older engines vary by year and market.
Can you put 5 quarts of oil in a Toyota Camry?
A five-quart container provides enough oil for many four-cylinder Camry changes, but you should not automatically empty the whole container. A 2024 gas 2.5L and 2025–2026 hybrid use about 4.5 quarts, while a 2018–2023 gas 2.5L and 2018–2024 hybrid use about 4.8 quarts. Several V6 models need more than five quarts. Add oil gradually and stop at the correct dipstick level.
How much oil does a 2012 Toyota Camry 2.5L four-cylinder take?
A 2012 Toyota Camry with the 2.5L four-cylinder takes about 4.6 quarts with a new oil filter. This generation commonly specifies SAE 0W-20, but confirm the grade in the owner’s manual.
What oil does a 2025 Toyota Camry use?
The 2025 Toyota Camry hybrid uses SAE 0W-8 oil meeting JASO GLV-1. Follow the owner’s manual before using SAE 0W-16 temporarily, and return to 0W-8 at the next change when the manual instructs you to do so.
Do I have to use Toyota Genuine Motor Oil?
No. Toyota Genuine Motor Oil is one suitable choice, but an equivalent oil may be used when it has the viscosity and performance certification required for your engine. Read the container label and the owner’s manual rather than choosing by brand alone.
Can I use 0W-20 instead of 0W-16 in a Toyota Camry?
Use 0W-20 only when the owner’s manual for your exact year and engine permits it. Many 2018–2024 2.5L Camry manuals allow 0W-20 as a temporary substitute when 0W-16 is unavailable and instruct you to restore 0W-16 at the next oil change.
What happens if you put too much oil in a Toyota Camry?
If the level is above the full mark, remove the excess before driving. Significant overfilling can aerate the oil, raise crankcase pressure, contribute to leakage, or cause smoke and rough running. Recheck the level on flat ground after the oil has drained back into the pan.
How do I know which engine my Toyota Camry has?
Use the owner’s manual, underhood emissions label, VIN-based Toyota lookup, or dealer parts counter. Do not identify the engine only from a trim badge because some model-year ranges offered gas four-cylinder, hybrid four-cylinder, and V6 powertrains.
Conclusion
Toyota Camry oil capacity is not one universal number. Common filter-change amounts range from 4.0 to 6.4 U.S. quarts, depending on the model year, engine, and whether the car is gas or hybrid. The 2024 gas 2.5L uses 4.5 quarts, while the 2024 hybrid uses 4.8 quarts. Newer 2025–2026 hybrids use 4.5 quarts of SAE 0W-8.
Find the exact year-and-engine row, buy enough oil for that capacity, and add about 0.2–0.3 quart less than the reference amount first. Run the engine, inspect for leaks, wait at least five minutes, and finish the refill with the dipstick.
Sources
- Toyota Owners: 2025 Camry Hybrid Maintenance Data — supports the 2025 Camry hybrid oil grade, JASO GLV-1 requirement, capacity guidance, and dipstick-verification process.
- Toyota 2025 Camry Warranty & Maintenance Guide — supports normal and special-condition oil-change intervals, maintenance records, and owner maintenance responsibilities.
- Toyota Support: Using Other Brands of Synthetic Oil — supports using an equivalent oil when it meets Toyota’s required viscosity and specification.
- American Petroleum Institute Motor Oil Guide — explains API SQ, ILSAC GF-7A/GF-7B, viscosity-specific certification marks, and current gasoline-engine oil standards.
- Toyota Owners Manuals & Warranties — official lookup source for model-year-specific Camry manuals and maintenance documents.
- Toyota USA Newsroom: 2024 Toyota Camry — provides Toyota’s official 2024 model materials and gas, hybrid, and V6 product-specification resources.
- Toyota Camry Official Model Page — confirms the current U.S. Camry powertrain lineup.
[…] is safe. Stop the engine, let the oil settle for several minutes, and check the dipstick. Add the correct oil grade for your Camry only if the level is low. If the warning remains or returns, tow the car instead of driving […]
[…] rag, gloves, flashlight, correct engine oil, owner’s manual, OBD scanner if available, mechanical oil pressure gauge for […]