Last updated: July 15, 2026
The correct Toyota Camry wiper blade size depends on the model year and the arm connector. For U.S.-market cars, 2018–2026 Camrys commonly use a 26-inch driver blade and a 20-inch passenger blade, while 2012–2017 models commonly use 26-inch and 18-inch blades. Length alone is not enough: the 2025 redesign created a connector-fitment break, so compare the old attachment or use a VIN-based lookup before ordering.
Affiliate disclosure: Auto Review Nest may earn a commission from qualifying purchases made through product links. This does not change the price you pay.
Quick Answer
A 2022 Toyota Camry uses a 26-inch driver-side wiper blade and a 20-inch passenger-side blade. That 26″/20″ pair is also common for 2018–2026, but the connector is not uniform across the full range. Many 2018–2024 cars use a 9×3 small-hook attachment. For 2025–2026, confirm the connector by VIN or by comparing the old blade before buying.
Key Takeaways
- A 2022 Camry commonly uses a 26″ driver blade and a 20″ passenger blade.
- 2012–2017 Camrys commonly use 26″/18″, not 26″/20″.
- The 2025 redesign is a connector breakpoint. Do not assume a blade labeled for 2018–2024 will attach to a 2025–2026 car.
- Most U.S.-market Camry sedans do not have a rear wiper.
- Replace blades when they streak, chatter, split, skip, or stop contacting the glass evenly.
At a Glance
| Time Required | 5–10 minutes |
| Difficulty | Easy DIY |
| Tools Needed | Usually none; a folded towel helps protect the windshield |
| Buying Check | Model year, both blade lengths, and connector type |
Toyota Camry Wiper Blade Size Chart by Model Year
Use the chart as a shopping starting point, not as a substitute for checking the car. These are common U.S.-market fitment-catalog sizes in inches. Imported models, changed wiper arms, regional trims, and catalog errors can affect the final fit.
| Model Years | Driver Side | Passenger Side | Rear Wiper | Fit Note |
|---|---|---|---|---|
| 2026 | 26″ | 20″ | None on sedan | Confirm the connector by VIN or by matching the old blade before ordering. |
| 2025 | 26″ | 20″ | None on sedan | Public catalogs disagree on connector naming. One current catalog lists a 22 mm wide push-button attachment, so verify the arm directly. |
| 2018–2024 | 26″ | 20″ | None on sedan | Commonly listed with a 9×3 small-hook attachment. |
| 2012–2017 | 26″ | 18″ | None on sedan | Do not substitute a 20″ passenger blade unless the old blade confirms it. |
| 2007–2011 | 24″ | 20″ | None on sedan | Check the old connector if the car has replacement arms. |
| 2002–2006 | 24″ | 19″ | None on sedan | A 19″ passenger blade is the common catalog size. |
| 1992–2001 | 21″ | 19″ | Usually none on sedan | Measure first if the vehicle has non-original arms. |
| 1989–1991 | 20″ | 18″ | Varies by body style | Older connector styles may differ from modern adapters. |
| 1987–1988 | 20″ | 18″ | 17″ on some rear-wiper body styles | Measure the rear blade if equipped. |
| 1983–1986 | 19″ | 19″ | 18″ on some rear-wiper body styles | Older applications need a direct connector check. |
Method note: This guide compares public fitment catalogs with Toyota owner guidance. It does not claim hands-on testing of every Camry year. When catalogs conflict, the old blade, arm shape, VIN-based lookup, and current parts listing should decide the purchase.
What Changed for the 2025 Camry Wipers?
The 2025 Camry began a new vehicle generation. The common blade lengths stayed at 26″ on the driver side and 20″ on the passenger side, but connector listings no longer match the 2018–2024 pattern consistently. One current catalog lists a 22 mm wide push-button attachment for 2025, while another lists a hook attachment.
That conflict makes a direct connector check more important than the printed length. Compare the new package with the old blade, inspect the end of the wiper arm, or use a VIN-based retailer lookup. Do not force a small-hook adapter onto a wide push-button arm.
How Do You Confirm the Camry Wiper Connector?
Blade length controls the wipe path. The connector determines whether the blade locks onto the arm. A correct-length blade with the wrong adapter may not install securely and can loosen, chatter, or detach.
| Camry Range | Common Connector Note | What to Check |
|---|---|---|
| 2022 Camry | 9 mm small hook, often labeled 9×3 | Choose blades listing 26″/20″ and 9×3 small-hook compatibility. |
| 2018–2024 Camry | Commonly listed as 9×3 small hook | Confirm the adapter label and listen for the lock click. |
| 2025 Camry | Catalog conflict; one current listing specifies a 22 mm wide push button | Match the old connector or use a VIN-based lookup before ordering. |
| 2026 Camry | Do not infer the connector from blade length alone | Confirm with the old blade, VIN fitment, or a Toyota parts counter. |
| 2012–2017 and older | Hook-style listings are common, but dimensions and adapters vary | Check whether the blade kit includes the adapter for your exact arm. |
[Products Worth Considering]
This three-piece windshield wiper set is designed for compatible Toyota RAV4 and Highlander models to help deliver clear visibility in everyday driving. The natural rubber blades feature a graphite-treated surface for quiet, smooth wiping performance and reliable weather resistance. Installation is quick and tool-free, making it easy to replace worn blades on the front and rear of your vehicle.
This front wiper blade set is designed to deliver clear, quiet visibility for compatible Toyota, Hyundai, and Honda vehicles with J/U hook wiper arms. The included driver and passenger blades provide a straightforward replacement for worn front wipers, with an OE-style connector and natural rubber edge for smooth wiping in rain, snow, and everyday driving. Always confirm your vehicle's fitment and original blade sizes before ordering.
This front wiper blade set is designed as a direct replacement for select Toyota Corolla and RAV4 models, helping restore clear visibility in rain and road spray. Built for smooth, quiet performance with an easy plug-and-play installation, it includes both blades needed for the front windshield and is made to support dependable everyday driving.
What Is Small-Hook Compatibility?
A 2022 Toyota Camry commonly uses a 26″ driver blade and a 20″ passenger blade with a 9×3 small-hook connector. Packaging may call this a “9 mm small hook,” “9×3 hook,” or “J-hook.” Buy only when the fitment listing names your exact year, make, and model or clearly includes the correct adapter.
Before removing the old blades, compare both new blades with the old pair. The longer blade belongs on the driver side. If the lengths look close, check the printed size on the blade spine or measure the wiping edge from end to end.
Adapter Installation Tips
Many beam, hybrid, and conventional blades include several adapters. Select the one that matches the arm, slide the blade fully into place, and pull gently after installation. A secure blade should stay locked when you tug it by hand.
Pro Tip: Open both boxes before starting. The correct adapter may be loose in the packaging rather than pre-installed on the blade.
Do the Driver and Passenger Wipers Use the Same Size?
Usually not. The driver blade is longer because it must clear a wider area in front of the steering wheel. The passenger blade is shorter to avoid the windshield edge, cowl, and driver blade.
| Position | Model Years | Typical Length |
|---|---|---|
| Driver | 2018–2026 | 26″ |
| Passenger | 2018–2026 | 20″ |
| Driver | 2012–2017 | 26″ |
| Passenger | 2012–2017 | 18″ |
| Driver | 2007–2011 | 24″ |
| Passenger | 2007–2011 | 20″ |
| Rear | Most U.S.-market Camry sedans | No rear wiper |
| Rear | Some older rear-wiper body styles | Measure the installed blade first |
Do not force a blade that is too long. It can strike the windshield edge, cowl, or opposite blade. A blade that is too short can leave an unwiped patch in the driver’s field of view.
Which Wiper Blade Type Is Best for a Toyota Camry?
After confirming size and connector, choose the blade construction for your climate and budget. Switching from conventional rubber to beam, hybrid, silicone, or winter blades does not change the required length.
[Products Worth Considering]
This JustCar windshield wiper blade set is designed as a premium replacement for compatible Toyota and Kia models, delivering smooth, streak-free wiping in all weather conditions. Built with a dual spring steel design, asymmetrical wind spoiler, and natural rubber, it helps reduce chatter while maintaining strong windshield contact. The easy-install fit supports U/J hook arms and comes as a matched set for dependable front wiper replacement.
This 3-piece windshield wiper set is designed for Toyota RAV4 models from 2019 to 2024 and also fits select Mazda 5 vehicles. It includes front and rear blades for a complete replacement, with Teflon-coated rubber for smooth, quiet wiping and reliable all-weather performance. The easy-install design helps match the original wiper arm structure for a simple, secure fit.
100% Brand New 20 and 26 inch Wiper Blades: Suitable for various weather conditions and seasons, ensuring excellent performance whether in cold winters or hot summers.
Are Silicone Wiper Blades Worth It?
Silicone blades usually cost more than basic rubber blades, but the wiping edge can resist heat and ultraviolet exposure better. They may suit a Camry parked outside in a hot climate or a car whose rubber blades harden quickly.
Price does not guarantee fit or clean wiping. Inspect any blade for splits, hardened edges, uneven pressure, and loose adapters. Replace it when performance declines rather than relying only on its age.
Are Beam Blades Better for Rain and Snow?
Beam blades use a frameless structure that spreads pressure along a curved windshield. They have fewer exposed frame joints than conventional blades, which can reduce places where slush or ice collects. Conventional blades remain a practical low-cost choice when they fit securely and wipe evenly.
| Blade Type | Best For | Tradeoff |
|---|---|---|
| Conventional | Basic, lower-cost replacement | Exposed frame joints can collect ice |
| Beam | Curved glass, rain, sleet, and light snow | Usually costs more than conventional |
| Hybrid | A balance of frame support and covered structure | Adapter fit still needs checking |
| Silicone | Heat and frequent sun exposure | Higher upfront cost |
| Winter | Freezing climates and regular snow | Can be bulky outside winter |
The best blade is the one that matches the Camry’s year, length, connector, and climate. A premium blade with the wrong adapter is still the wrong blade.
Should You Check Washer Fluid When Replacing Wipers?
Yes. Clean washer spray helps the blades remove dust, salt, and road film without dragging across dry glass. Toyota’s general washer-fluid guidance recommends checking the semi-opaque reservoir, removing the washer-symbol cap, and adding suitable fluid slowly. Reservoir capacity varies, so stop at the tank’s fill indication instead of relying on one universal Camry capacity.
Use winter-rated washer fluid where freezing temperatures occur. If the reservoir is empty, refill it before repeatedly operating the washer. If spray still does not reach the glass, inspect for a clogged nozzle, frozen line, blown fuse, disconnected hose, or pump fault.
Warning: Do not use plain water in freezing weather. It can freeze in the reservoir, lines, or on the windshield and reduce visibility.
How to Install and Maintain Camry Wiper Blades
Some Camry wiper arms park below the hood line. If yours cannot lift freely, use the model-year service-position procedure in the owner’s manual. Forcing a hidden arm upward can make it contact the hood edge.
[Products Worth Considering]
【PREMIUM WIPER BLADES】: High quality automotive replacement windshield wiper blades, improve driving visibility and safety, to achieve smooth, clean wiping effect.
【PREMIUM WIPER BLADES】: High quality automotive replacement windshield wiper blades, improve driving visibility and safety, to achieve smooth, clean wiping effect.
100% Brand New 18 and 26 inch Wiper Blades: Suitable for various weather conditions and seasons, ensuring excellent performance whether in cold winters or hot summers.
How to Replace Camry Wiper Blades
- Confirm the sizes. For a 2022 Camry, use 26″ on the driver side and 20″ on the passenger side.
- Confirm the connector. Compare the arm and old blade with the new adapter before removing anything.
- Move the wipers where you can reach them. Use the owner’s manual service-position procedure if the arms park under the hood.
- Protect the glass. Place a folded towel under the arm. A bare metal arm can damage the windshield if it snaps down.
- Release the old blade. Press the latch or tab, then slide the blade away from the hook or connector.
- Install the matching adapter. Do not assume the adapter pre-installed on the blade is correct.
- Lock the new blade. Slide it into place until it clicks or fully seats.
- Do a tug test. Pull gently to confirm the blade cannot slide off.
- Test on wet glass. Use washer fluid before running the new blades.
When Should You Replace Camry Wiper Blades?
Inspect the blades monthly and replace them when they streak, split, chatter, skip, or leave an unwiped area. A 6–12 month interval is a common starting point, but strong sun, ice, road salt, tree sap, and heavy use can shorten service life.
Common Camry Wiper Problems and Fixes
| Problem | Likely Cause | Fix |
|---|---|---|
| Streaking | Dirty glass, worn rubber, or hardened edge | Clean the glass and blade edge; replace the blade if streaking remains. |
| Chattering | Dry glass, residue, bent arm, or poor blade angle | Clean and wet the glass, then inspect arm pressure and blade seating. |
| Skipping | Worn blade, wrong connector, or uneven pressure | Confirm the adapter lock and replace a worn blade. |
| Unwiped area | Wrong length or weak contact | Check the year-specific size and compare it with the old blade. |
| No washer spray | Low fluid, clogged nozzle, frozen fluid, fuse, hose, or pump issue | Refill with suitable fluid, inspect the nozzle and hose, then diagnose the electrical circuit if needed. |
| Blade feels loose | Wrong adapter or incomplete lock | Remove and reinstall it with the correct adapter until it locks securely. |
Frequently Asked Questions
What size wiper blades fit a 2022 Toyota Camry?
A 2022 Toyota Camry commonly uses a 26-inch driver-side blade and a 20-inch passenger-side blade with a 9×3 small-hook attachment. Confirm the package lists your exact vehicle before buying.
What size wiper blades fit a 2025 Toyota Camry?
A 2025 Toyota Camry commonly uses a 26-inch driver blade and a 20-inch passenger blade. Connector catalogs conflict, and one current listing specifies a 22 mm wide push-button attachment, so confirm the arm or use a VIN-based lookup.
Are 2024 and 2025 Camry wiper connectors the same?
Do not assume they are the same. A 2024 Camry is commonly listed with a 9×3 small hook, while one current 2025 listing specifies a 22 mm wide push button. Compare the old blade or use VIN-based fitment.
What size wiper blades fit a 2012–2017 Toyota Camry?
Most 2012–2017 Camrys commonly use a 26-inch driver blade and an 18-inch passenger blade. Confirm the connector and adapter before installation.
How do I tell which Camry wiper connector I have?
Look at the end of the wiper arm after lifting it safely. A hook curves back like a J, while a push-button arm has a flatter end and release button. Match the old blade, adapter label, and VIN-based fitment listing.
Does a Toyota Camry have a rear wiper blade?
Most U.S.-market Toyota Camry sedans do not have a rear wiper. Some older rear-wiper body styles may use one, so measure the installed rear blade before ordering.
How often should I replace Camry wiper blades?
A 6–12 month interval is a common starting point, but condition matters more than the calendar. Replace the blades sooner if they streak, chatter, skip, split, or leave an unwiped area.
Conclusion
For a 2022 Toyota Camry, start with a 26″ driver blade and a 20″ passenger blade with 9×3 small-hook compatibility. For 2012–2017, the common pair is 26″/18″. For 2025–2026, use 26″/20″ as the length reference but verify the connector directly because the new generation does not share one dependable attachment listing with 2018–2024.
Before buying, check the model year, both lengths, and arm connector. Before installation, protect the windshield and use the owner’s manual service position if the arms sit below the hood. After installation, tug each blade gently and test it on wet glass.
Sources
- Toyota Owners: 2022 Camry manuals and warranties — supports checking model-specific owner information and procedures.
- Toyota: Changing Your Windshield Washer Fluid — supports washer-fluid inspection and refilling guidance.
- WiperBladesUSA: 2022 Toyota Camry wiper size chart — lists 26″/20″ sizing and a 9 mm small-hook attachment.
- WiperBladesUSA: 2024 Toyota Camry wiper size chart — lists 26″/20″ sizing and a 9×3 small-hook attachment.
- WiperBladesUSA: 2025 Toyota Camry wiper size chart — lists 26″/20″ sizing and a 22 mm wide push-button attachment.
- WiperBladesUSA: 2026 Toyota Camry blade listing — lists a 26″/20″ front pair.
- AllWiperSize: Toyota Camry wiper blade size chart — supports multi-year size ranges and shows why connector details should be cross-checked.
[…] Worn or damaged blades: If the wipers move but smear, skip, chatter, or leave streaks, inspect the blades and windshield surface before diagnosing the motor. If fit is uncertain, confirm the correct Camry wiper blade size and connector. […]