Factory cup wells in the Tesla Model S and Model X are wide enough for big bottles, which leaves standard coffee cups and slim cans tipping during brisk acceleration or lane changes. Choosing the right Tesla Model X cup holder inserts keeps drinks upright, shields the center console from sticky spills and scratches, and stops loose keys or coins from rattling.
For 2022–2026 refreshed interiors, our top pick is the Yumzeco Insert because it snaps flush into the factory console and cushions everyday cups without getting in the way. If you also want shallow compartments for keys and cards, get the two-piece BASENOR Organizer.
We selected these four inserts by comparing model-year console fitment, material washability, beverage grip, and owner feedback across Tesla forums and accessory retailers.
Tesla Model X Cup Holder Inserts Compared
| Product | Best for | Compatible Years | Material | Dimensions | Score |
|---|---|---|---|---|---|
 |
Best overall | 2022–2026 Model S/X | Plastic | 6.7 x 3.5 x 3.5 in. | 85/100 |
 |
Best organizer set | 2022–2026 Model S/X | Plastic | 5 x 5 x 5 in. | 90/100 |
 |
Best silicone fit | 2022–2026 Model S/X | Silicone | 7.25 x 3.28 x 3.08 in. | 95/100 |
 |
Best for older models | 2016–2021 Model S/X | ABS, Silicone | Fits 2016–2021 console | 78/100 |
Tesla Model X Cup Holder Inserts: Our Top Picks
1. Yumzeco Insert
Bottom line: The Yumzeco Insert is a purpose-built drop-in sleeve for 2022–2026 Model S and Model X consoles that stops coffee cups, soda cans, and slim water bottles from tipping during daily driving.
- Compatibility: 2022–2026 Tesla Model S and Model X, fits refreshed consoles without interfering with the lid
- Material: Molded plastic with cushioned walls, dampens bottle rattles and shields factory trim
- Configuration: Single-piece dual cup insert (6.7 x 3.5 x 3.5 inches), sits flush inside the front cup well
- Maintenance: Tool-free drop-in fit, lifts straight out for rinsing in the sink
Because the factory cup wells on refreshed Model S and Model X interiors are wide and slick, standard takeout cups and 12-ounce cans tend to slide around on highway ramps. This insert narrows the opening just enough to hug common drinkware and keep condensation and coffee drips off the OEM plastic underneath.
Its low-profile black finish blends cleanly with the factory cabin, so it looks like an original part rather than an aftermarket add-on. While the thicker walls mean oversized insulated jugs or a phone dropped into the cup well will not fit, drivers carrying regular mugs and bottles get a much quieter, spill-free commute.
- Vehicle-specific fit for 2022–2026 Model S and Model X consoles
- Holds cans, coffee cups, and slim bottles upright during turns
- Catches minor drips and shields the factory console from scratches
- Sits flush for a clean, factory-matched appearance
- Reduces cup well diameter, blocking wide tumblers
- Leaves less room if you store a smartphone inside the cup area
2. BASENOR Organizer
Bottom line: The two-piece BASENOR Organizer combines a removable cup holder liner with a shallow storage tray, making it the best choice if you want drink stability and small-item organization in one upgrade.
- Compatibility: 2022–2026 Tesla Model S and Model X, custom-molded for the refreshed center console
- Material: Rigid plastic tray with non-slip mat liner, prevents keys and coins from rattling
- Configuration: Two-piece set (5 x 5 x 5 inches package size) with divided storage tray and cup well mat
- Maintenance: Both pieces lift out independently for quick wiping or rinsing
Tesla’s deep center console bin can swallow key cards, sunglasses, and charging cables into a single pile at the bottom. BASENOR solves both problems at once: the upper tray keeps small daily essentials within easy reach, while the cup holder mat cushions beverages and catches condensation.
Because the tray and cup mat are separate pieces, you can pull out just the cup liner after a coffee spill without unloading your wallet or sunglasses. You do give up a bit of open vertical height in the lower bin unless you lift the tray out, and tall bottles still require leaving the sliding console door open.
- Two-piece kit organizes the console bin and cushions the cup holders
- Non-slip lining stops keys, coins, and cans from rattling on rough roads
- Tailored for 2022–2026 Model S and Model X interiors
- Backed by a 1-year manufacturer warranty
- Tray must be lifted to reach bulkier items stored underneath
- Does not expand the cup well for oversized water jugs
3. Ushilife Silicone
Bottom line: The Ushilife Silicone insert gives 2022–2026 Model S and Model X owners a soft-touch, flexible silicone liner that grips cans tightly and rinses clean under a faucet in seconds.
- Compatibility: 2022–2026 Tesla Model S and Model X front center console cup area
- Material: Flexible, washable silicone that absorbs vibration and grips smooth cans
- Configuration: One-piece dual cup insert (7.25 x 3.28 x 3.08 inches), contours to the factory well
- Maintenance: Pulls out effortlessly to wash with mild soap and warm water
If your top priority is stopping metal tumblers and aluminum cans from clinking against hard plastic, full-silicone construction makes a noticeable difference. The pliable walls flex slightly as you press a drink in, creating friction that keeps narrow cans upright through stop-and-go traffic and bumpy stretches.
Cleanup is as simple as lifting the one-piece sleeve out by its rim and rinsing away spilled coffee or crumbs. Like other thick liners, it trims the inner diameter of the factory cup holder, so wide bottles or phones stored upright in the cup well can feel cramped.
- Soft silicone cushions drinks and silences metal-on-plastic rattles
- Pulls out and rinses clean with soap and water in seconds
- Custom-shaped for 2022–2026 Model S and Model X front cup wells
- Includes a 6-month manufacturer warranty
- Narrows the cup opening, restricting oversized mugs and wide bottles
- Only covers the cup holder area, adding no extra console compartments
4. Jaronx Tray
Bottom line: Built specifically for 2016–2021 Model S and Model X vehicles, the Jaronx Tray drops into the deep legacy center console to add dual cup holders and an upper shelf for phones, keys, and cords.
- Compatibility: 2016–2021 pre-refresh Tesla Model S and Model X deep center consoles
- Material: Molded ABS plastic shell with silicone compartment liners and side friction pads
- Configuration: Upper organizer tray with dual integrated cup wells (holds bottles up to 21 oz)
- Maintenance: Removable silicone mats rinse clean while the ABS shell wipes down with a damp cloth
Older Model S and Model X cabins feature a deep, open center trough where phones, sunglasses, and drinks quickly slide out of reach. This molded tray sits near the top of that cavity, giving you dedicated cup spots alongside shallow compartments while letting the factory sliding console door close halfway around the cup wells or shut completely when empty.
Side sponge pads grip the inner console walls so the tray stays put during acceleration. Because the cup wells are constrained by the width and height of the legacy console box, they fit standard cans and water bottles up to 21 ounces best, while tall insulated tumblers require leaving the sliding door open.
- Reclaims the deep 2016–2021 Model S and Model X console cavity
- Adds both dual cup holders and a shallow phone and key tray
- Side friction pads prevent sliding and allow normal console door use
- Removable silicone compartment liners dampen noise
- Cup wells max out around 21-ounce water bottles
- Not compatible with 2022–2026 refreshed Model S or Model X interiors
Yumzeco Insert vs BASENOR Organizer: Which Should You Get?
Both picks are tailored for 2022–2026 Model S and Model X consoles, so your choice comes down to whether you only want tighter cup wells or a full console storage upgrade.
- Scope of upgrade: The Yumzeco Insert focuses strictly on stabilizing drinks inside the factory cup holder, whereas the BASENOR Organizer adds a divided upper storage tray plus a removable cup holder mat.
- Console access: Yumzeco leaves the main sliding console bin completely open for taller items, while BASENOR creates a two-layer bin that keeps keys and cards on top.
- Warranty coverage: BASENOR specifies a 1-year manufacturer warranty, while Yumzeco does not list a formal warranty period.
Which Tesla Model X Cup Holder Insert Should You Buy?
Match your insert to your vehicle’s model year and how you use the center console every day:
- For a dedicated, flush-fitting cup sleeve in a 2022–2026 Model S or X: get the Yumzeco Insert.
- For extra compartments for keys and cards plus a non-slip cup mat: get the BASENOR Organizer.
- For a soft, flexible silicone cup liner that rinses clean in seconds: get the Ushilife Silicone.
- For a 2016–2021 pre-refresh Model S or Model X with a deep console trough: get the Jaronx Tray.
How We Chose
- Generation-specific console fit: Tesla redesigned the Model S and Model X center console for the 2021–2022 refresh, so we verified whether each insert matches the 2016–2021 deep console or the 2022–2026 horizontal-screen layout.
- Drink stability and noise control: We looked for cushioned walls and non-slip bases that stop 12-ounce cans, coffee cups, and water bottles from tipping or rattling without blocking the sliding console lid.
- Material durability and ease of cleaning: Silicone, TPE, and molded ABS plastic resist coffee stains and condensation, and lift out without tools or adhesives for washing.
- Owner feedback and safety records: We cross-checked manufacturer specifications, owner trends across Tesla forums and accessory retailers, and NHTSA and CPSC recall databases.
What to Look for in a Tesla Model X Cup Holder Insert
Console Generation and Model Year Compatibility
Tesla Model S and Model X interiors split into two incompatible console designs. Vehicles built from 2016 through early 2021 feature a vertical touchscreen and a deep, open center cavity, which requires a full drop-in shelf like the Jaronx Tray. Refreshed 2022–2026 vehicles have built-in front cup wells and a sliding console door, so they need a contoured insert like the Yumzeco Insert.
Silicone Cup Sleeves vs Multi-Piece Organizer Trays
A one-piece silicone sleeve focuses on gripping cans and catching spilled liquid inside the cup well. If you only want firmer drink support and fast sink rinsing, go with the Ushilife Silicone. If loose sunglasses, key cards, and charging cables also clutter your console, the two-piece BASENOR Organizer solves both issues at once.
Cup Depth and Bottle Diameter
Any insert that stabilizes narrow cans works by adding wall thickness inside the factory opening. That extra cushioning keeps standard coffee cups and 16-to-21-ounce water bottles upright, but it trims a few millimeters of width for oversized 32-ounce jugs. Measure your favorite tumbler’s base diameter and height before buying.
Mistakes to Avoid When Buying a Tesla Model X Cup Holder Insert
- Ordering for the wrong console refresh: A 2016–2021 tray will not fit a 2022–2026 refreshed console, so check whether your Tesla has the vertical or horizontal center screen first.
- Assuming wide insulated jugs will fit inside a padded liner: Cushioned sleeves narrow the cup opening for standard cans and mugs; remove the liner when carrying oversized bottles.
- Using adhesive tapes or harsh chemical cleaners: Quality silicone and ABS inserts stay put by friction alone, and mild soap with water cleans them without degrading the finish.
- Forcing the sliding console lid closed against a tall bottle: Check clearance on tray-style organizers so the sliding door tracks smoothly without binding.
FAQs
Are these cup holder inserts compatible with every Tesla Model X?
No, compatibility depends on your vehicle’s console generation. The Yumzeco Insert, BASENOR Organizer, and Ushilife Silicone fit 2022–2026 refreshed consoles, while the Jaronx Tray fits 2016–2021 interiors. Always match your model year and console style before ordering.
Will a Tesla cup holder insert fit tall bottles or a smartphone?
Most inserts narrow the cup well slightly to keep standard cans, coffee cups, and 16-to-21-ounce bottles from tipping. Because of that added wall thickness, wide insulated tumblers or large smartphones placed upright inside the cup well may not fit. If you want dedicated phone storage, choose a tray-style organizer like the Jaronx Tray.
How do you clean and maintain Tesla center console inserts?
Lift removable silicone sleeves or mats straight out of the console, rinse them under warm water with mild dish soap, and let them air dry completely before reinstalling. For rigid ABS plastic trays, wipe the shell with a damp microfiber cloth and clear away trapped crumbs beneath the tray periodically to prevent odors.
Do 2021 Tesla Model S and Model X cars use the old or new console insert?
Tesla transitioned between interior layouts during the 2021–2022 model years, so check your center touchscreen orientation. Cars with a vertical touchscreen have the legacy deep console that fits the Jaronx Tray, while cars with the horizontal landscape screen and front wireless phone pad use the 2022–2026 inserts.
Will a cup holder insert stop the Tesla center console sliding door from closing?
No, all four inserts sit flush with or below the factory console tracks when empty. On 2016–2021 models using the Jaronx Tray, the sliding door can close halfway to leave the cup wells exposed or shut completely when no bottles are inside.
Does a silicone cup holder insert pull out when you lift a mug?
With standard cans, paper coffee cups, and smooth bottles, the insert stays seated at the bottom of the factory well. If you wedge a rough-textured or oversized mug tightly into a flexible liner like the Ushilife Silicone, it can occasionally lift slightly with the cup and presses right back into place.
Can you use a cup holder insert and a center console organizer together?
Yes, on 2022–2026 models the front cup well is separate from the sliding lower storage bin, so a cup insert does not block an under-armrest or lower console tray. If you want both pieces matched out of the box, the BASENOR Organizer bundles a storage tray and cup mat together.
Do aftermarket center console organizers rattle while driving?
Vehicle-specific inserts molded from soft silicone or lined with non-slip mats actually reduce cabin noise compared with bare factory plastic. They cushion metal cans and keep keys and coins from sliding across hard surfaces during acceleration and braking.
Final Verdict
Choosing the right Tesla Model X cup holder insert keeps daily drinks upright and protects your center console from spills and wear. For most 2022–2026 Model S and Model X drivers, the Yumzeco Insert delivers the cleanest factory look and dependable grip for everyday cups and cans.
If you also want compartments for small items, choose the two-piece BASENOR Organizer; pick the Ushilife Silicone for a soft, washable silicone sleeve, or get the Jaronx Tray for 2016–2021 consoles.
